Cutting down a kitchen cabinet

My friends got a new fridge, AND wanted to yank the laminate countertop, and install granite tile.

I volunteered to help.

The countertop thing is moving along swimmingly.

The fridge is probably 1/2” too tall for the space under the upper cabinet. They figured it might be.

All the upper cabinet tops are at the same level on the wall, so … they’re not keen on raising this one up, a skosh. They’re hardwood cabinets—probably Oak—including the “aprons.”

So … I want to cut down the bottom apron … by the needed +/- 1/2”.

My thought ? Just bring it back to my house, and do the four cuts on the TS, with masking tape on the cut lines, and a very fine (80t ?) blade.

I also thought about the router table and a straight bit, or … just hogging it all off with the belt sander, and 80-grit paper, but … I keep coming back to the table saw.

Any thoughts about the “best” or “right” way ??

I’ll check back, this evening … before I start in on it.

Thanks !

Source: http://lumberjocks.com/topics/31939

patriots schedule kanye west runaway film carolina panthers