I don't know why "wagon vises" have their name, but I know that I like them.
Wagon vises don't have the sagging problems that some tail vises have in their middle age, they give you more of your benchtop back for pounding and are generally more compact. The only real problem with wagon vises was that they didn't really exist in the modern world. No one made them.
Jameel Abraham of Benchcrafted changed that in 2006 when he began manufacturing bench hardware (which I purchased and installed on my 2005 Roubo workbench).
Now Lee Valley has entered the wagon vise market with the Veritas Inset Vise, an $89 piece of hardware that screws into a recess in your benchtop. I've had a prototype of the Veritas Inset Vise on a mocked-up benchtop since the spring. And now I have the production version and can discuss it in detail.
On the plus side, this vise is easy to install. You cut a shallow cavity in your benchtop, drop the hardware in place and drive in six screws to secure it. Done.
The vise operates by turning a stainless toggle to move a sliding plate. Your dogs drop into that plate, and you have two positions and two styles of dogs to choose from. The two positions allow you have your dog holes far apart on your benchtop (up to 7-3/4", which is a bit lazy in my opinion). The two kinds of dogs allow you to clamp square work with the standard dog or wacky shapes with the optional rotating dog.
Both of these dogs are 1/2" tall, which allows you to clamp most common thicknesses. For clamping thin stuff, you can make a low-profile dog in a variety of ways. I plan to make one from a 1/4"-thick chunk of hardwood with a couple 1/4"-diameter steel pins.
The downsides to the vise are minor, but they need to be considered before buying one. Because the vise is inset into the top of your bench, you are going to have to remove it when you wish to flatten the benchtop. And eventually, you'll have to make your cavity deeper. It's not a big deal, but it is something to be aware of.
Second, the vise is a little slow compared to other end vises. The vise's moving block travels 4" and requires 40 turns of the toggle to make the entire trip. It's not annoying, but I do get impatient with it when comparing it to my quick-release end vise.
Overall the vise is extremely well made. All the parts are well-fit and finished. The knurling on the stainless toggle is an impressive piece of work. I wouldn't hesitate to put this vise on one of my workbenches. But first I'd have to build another bench.
You can read more about the Veritas Inset Vise or purchase one from Lee Valley Tools.
? Christopher Schwarz
Other Workbench and Vise Resources
? Workbenchdesign.net is your one-stop place for all things workbench. Joe-Bob says check it out.
? Thinking about building a workbench? Crazy enough to do it by hand? Then I recommend the DVD we produced this year that documents how I built a French-style workbench using hand tools. "Build an 18th-century Workbench" is available in our store.
Source: http://blog.woodworking-magazine.com/blog/First+Look+Veritas+Inset+Vise.aspx
Keine Kommentare:
Kommentar veröffentlichen